Auto extraction · cleaning · dewatering & polishing · baling, in one line
Coverage: Sisal · Banana Stem · Ramie · Pineapple Leaf · Hemp · Kenaf
Platform-based design with continuously upgradeable extraction and combing modules — keep gaining yield and quality without replacing the whole machine
Auto-feed and full guarding engineered in from the drawing board — operators stay clear of high-speed parts
Automated feeding and combing cut a traditional 7-person crew down to 2 without losing output
Fine cutting and gentle combing keep impurity below 5% for consistent top-grade output
Continuous operation from auto extraction to cleaning, dewatering & polishing and baling — fewer operators, steadier output.
From mobile units to automated lines, extracting fiber from fresh leaves efficiently with low loss.
Rotating beating removes pulp, dust and impurities for clean, high-quality fiber.
Dewatering-polishing combo removes moisture and polishes the fiber surface.
Standard baling for storage and transport; loose-fiber recovery and bagasse pressing cut loss.
Tailored engineering, iterative upgrades, safety by design, minimal staffing and high-quality fiber — backed by full lifecycle service from drawing board to delivery.
Platform-based design with upgradeable extraction and combing modules — keep gaining yield and quality without replacing the whole machine.
Traditional machines lag by decades — inefficient, wasteful and water-hungry, with costly full replacement.
Auto-feed and full guarding engineered in from the drawing board — operators stay clear of high-speed parts, meeting international safety standards.
Guardless machines put operators at risk of severe injury and can be shut down for non-compliance.
Highly automated feeding and combing cut a traditional 7-person crew down to 2 without losing output.
Labor is scarce during harvest; processing capacity is constrained by headcount.
Fine cutting avoids over-cutting and gentle combing protects fiber length — impurity below 5% for consistent top-grade output.
Over-cutting and poor grading downgrade fiber and directly cut your selling price.
Site surveys, tailored design and custom delivery matched to your leaf variety, scale and power/water conditions, with a firm timeline from design to installation.
Leaf variety, scale and local power/water differ by region; standard machines rarely fit directly.
Spare parts in stock, remote fault diagnosis and a local service network that back every machine across its entire lifecycle.
When suppliers disappear, nobody maintains the machine — a lasting worry for buyers.
From fiber extraction lines to spinning deep-processing, configured by feedstock and scale.
Fiber processing machines from extraction to baling — sold individually or combined into lines.
ZGM series for small and medium growers — dedicated models for sisal, pineapple/banana and hemp/jute.
Economical entry choice, simple to operate, ideal for small scale and trials.
CZ series removes pulp, dust and impurities from dry fibers via rotating beating.
Removes moisture and polishes the fiber surface for higher cleanliness and quality.
Continuous dewatering for stable moisture before drying and baling.
Compresses finished fiber into standard bales for storage and transport.
FW-2 with synchronous double spindles, ideal for small processors and sample making — flexible and efficient.
Sisal-dedicated automatic extraction line — green leaves in, white fiber out.
Sisal and banana stem fiber lines delivered in Tanzania, Colombia, Bangladesh, the Philippines and Vietnam.
Tanzania (sisal fiber, 1,000 t/yr)
Colombia (sisal fiber, 500 t/yr)
Bangladesh (banana stem fiber, 500 t/yr)
Philippines (sisal fiber, 500 t/yr) · Vietnam (sisal sliver & yarn, 1,000 t/yr)
From sample testing to long-term spare parts — full-lifecycle service around your equipment and line.
Unsure if your feedstock fits? Send it to our Zhanjiang factory for a trial before deciding.
Complete drawings — plant layout, equipment foundation and arrangement plans.
On-site or remote installation, commissioning and training; long-term resident engineers for overseas projects.
Capacity increase, automation retrofit and machine improvements for existing lines.
Genuine spares with long-term supply; technical archives and drawings kept 10+ years.
Everything above, packaged — consultation → design → manufacturing → installation & training → long-term support, with one dedicated manager throughout.
Sisal, banana stem, ramie, pineapple leaf, hemp, kenaf and jute can all be handled — a sample trial is recommended to confirm output and capacity.
Choose a mobile unit or economy line for low investment and fast payback, then upgrade to an automated line later.
Yes. Send a sample to our Zhanjiang factory; our team runs the full trial and confirms the parameters.
Textile, rope making, composite reinforcement and more — we also offer combing, drawing, spinning and winding equipment.
We can send engineers for on-site installation, commissioning and local team training, with long-term parts and remote support.
Single machines 45–60 days; complete lines 60–90 days, subject to configuration and schedule.
Share feedstock, target capacity and site info — our engineering team will respond with equipment configuration and process flow.
TSR / RSS / compound rubber complete lines and machines, from breaking to baling.
Crushing and milling recovery equipment for carbon fiber, glass fiber and more.
Type to search the whole site
No results found
